Heated Dual-Motor Rabbit Vibrator — Body-Temperature Warming, 7 Modes, IPX5

The only model in the VOVOHO A-series to incorporate a built-in heating element — a constant-temperature warming system that automatically maintains the silicone surface at 40°C ± 1°C, cycling on and off autonomously to sustain body-temperature warmth throughout the full session. This thermal feature is a premium differentiator with proven retail story value, particularly in EU and North American markets where heated personal wellness devices command a distinct category position.

The VVH-A0079 combines a 210mm body-safe silicone body with a ribbed, G-spot-angled shaft and a split dual-prong clitoral stimulator arm. Dual synchronized motors deliver 7 vibration patterns across both zones simultaneously. The sculptural metallic ABS finger-ring base — shared visual language with the A0040 platform — integrates the magnetic charging port and two-button control interface (ON/OFF + vibration mode).

Key specification highlights:

• Full body-safe silicone + ABS construction
• Built-in constant-temperature heating element — warms silicone surface to 40°C ± 1°C
• Auto-thermostat: heating activates below 37°C, deactivates at 40°C — maintains warmth continuously
• Heating function independently switchable from vibration — can be used with or without vibration
• Dual synchronized motors — G-spot textured shaft + split-prong clitoral arm
• 7 vibration patterns, continuously looping
• Built-in 3.7V / 750mAh rechargeable lithium battery
• Magnetic USB charging (DC 5V, directional) — charge time approx. 150 min
• LED indicator (white): solid during use, flashing during charging, solid when fully charged
• IPX5 waterproof rating — splash and moisture resistant
• 210 × 65 × 33 mm profile, 160 g
• Up to 90-minute runtime (vibration + heating active simultaneously)
• Noise level ≤58 dB at 10 cm (standard operating conditions)

Control operation (2-button interface):

• Long press ON/OFF (2 sec) to power on — LED illuminates (solid white)
• Short press ON/OFF once: heating activates — LED enters flashing mode; short press again: heating deactivates — LED returns to solid
• Long press ON/OFF (3 sec): full power off — LED extinguishes
• Short press vibration "W" key during operation: cycles through 7 vibration patterns (0→1→2→...→7→0, loops continuously)
• Heating and vibration are independently controlled and can run in any combination

Heating technology note for buyers:

• Heating element is embedded within the silicone body — no external heating pad or sleeve required
• Auto-thermostat prevents overheating — temperature cannot exceed 41°C under normal conditions
• Heating function activates independently of vibration and vice versa — allows warmth-only or vibration-only modes
• Surface warming typically reaches target temperature within 2–4 minutes from cold start

Design differentiation — A0079 vs. A0040 (closest comparable):

• Heating element — the sole differentiator and primary premium claim; not present in any other A-series model
• Heavier (160g vs. 130g) due to heating wire and larger battery (750mAh vs. standard)
• Longer shaft (210mm vs. 198.5mm)
• Otherwise same rechargeable, IPX5, dual-motor, magnetic-charge platform architecture

Private label and OEM/ODM support:

• Custom logo (engraving or printing on silicone or ABS ring frame)
• Custom colorway matching available on silicone body and ABS ring trim
• Retail box, multi-language user manual, USB magnetic charger included, barcode, and master carton
• OEM/ODM packaging design coordination available

Buyer notes:

• MOQ: 500 pcs
• Lead time: 25–35 days from sample and artwork approval
• CE and RoHS documentation available on request
• Third-party pre-shipment inspection supported
• FOB/CIF international shipping terms available